The Fronius manufacturing plant in Austria.Fronius
The Section 301 tariffs on Chinese inverters are forcing many companies to make big decisions, even though the expected jump from 10 to 25% tariffs set for Jan. 1, 2019 has been stalled for 90 days of negotiation. Out of the 18 company reps that answered Solar Power World’s solar inverter manufacturing survey, more than half said their companies will be affected in some way by the Chinese tariffs. Even those without manufacturing facilities in China are bound to feel some tariff effects—for example, the control boards used in most inverters are still made cheapest in China. Wholesale Ev Charging Pile Factory
Of the companies that said they will be affected, some had long been planning for the worst, often coming up with mitigation strategies as soon as President Donald Trump was sworn in. Some have initiated backup manufacturing facilities outside of China. Others are staying in China but passing the tariffs on to the customers. Others still have stocked North American shelves with Chinese-manufactured inverters before the tariffs came into effect and hope those will last until the tariffs end.
Companies are taking different approaches to place themselves in the best possible position in case tariffs increase after the negotiation period ends in March.
Sungrow Power Supply’s new inverter manufacturing plant in India. Sungrow
Sungrow Power Supply saw impending Chinese tariffs as soon as Trump became president. The company’s sole manufacturing hub at the time was in China, so it decided to take over a facility in Bangalore, India, with 3 GW of annual production capacity in case a trade war began.
The plant in India is producing some string and central inverters for the U.S. market now, but Sungrow would move 100% of U.S. inverter production to that plant if the tariffs increase from 10 to 25% after the negotiation period. The 36-GW Chinese plant would still supply inverters to its other markets in China, South America and elsewhere.
A Sungrow spokesperson said the company plans to do everything possible to make sure its customers don’t feel the tariff impacts. There have been no price increases yet.
Hank Wang, president of Sungrow Americas, said in a statement: “We remain optimistic that an agreement between the two nations will be reached amicably and we can put this behind us. That being said, Sungrow Americas is largely unaffected by any Section 301 situation, as our 3-GW factory in India is activated to support the U.S. market with ‘tariff-free’ string and central inverters.
“As a result, our customers will not feel any negative consequences from the tariff; such as a price increase. We’re witnessing tremendous growth in the U.S. market, particularly in the utility-scale segment, and are fully committed to continuing our accelerated progression.”
Similarly, in September 2018, microinverter manufacturer Enphase announced it expanded its contract with multinational technological manufacturer Flex in Mexico as part of a mitigation plan for the Section 301 tariff. It currently manufactures inverters in China, but starting in Q2 of 2019, Flex Mexico will make Enphase Energy’s products for the U.S. market.
CPS America manufactures the core powerhead of its string inverters in China but announced in July 2018 its plans to bring manufacturing of some of the more customizable aspects of the inverters to Texas.
General manager Ed Heacox said the company also has access to sister divisions of CPS America that have operating manufacturing sites in Southeast Asia, outside of China.
“These sites are primary options. No tariff,” Heacox said. “Also, we have assembly ability in Texas which can cut the tariff to less than half.”
OutBack Solar manufactures two inverters in China, and VP of commercial operations Brandon Provalenko said he doesn’t mind moving those products out if the tariffs increase.
SMA’s inverter manufacturing plant in Germany. SMA Solar Technology
The company is considering following Enphase’s lead and moving U.S. inverter manufacturing to Flex in Mexico. Provalenko said there’s no reason to risk keeping operations in China if OutBack has the option to move them out. One part of OutBack’s inverter will remain in China though—the control panel is still the cheapest to make there, even with the possible addition of a 25% tariff.
OutBack’s cost to manufacture inverters has already increased with the Section 232 steel and aluminum tariffs, and its customers saw a price increase of 10% in September 2018. Provalenko said OutBack passed the costs “buck for buck” to its customers, but the company doesn’t expect to do any more price increases based on tariffs.
Despite the hiked prices on the customer’s end, Provalenko said he’s in favor of the tariffs. He said in the short term, tariffs could level the playing field between companies that manufacture inverters in China and the United States. But he expects that in the long term, many manufacturers will just move manufacturing or supply out of China.
Battery-based inverter manufacturer Sol-Ark produces inverters in both China and Texas, but does not expect to have to raise prices. In a press email in November 2018, Bob Mitchell, solar consultant for Sol-Ark, said many of the company’s competitors have already implemented price increases to offset the additional cost, but that it’s doing its best to keep prices affordable. However, if the 25% tariff increase sets in, Mitchell said in the email that it will be difficult for Sol-Ark to maintain its current prices.
Tigo Energy also manufactures its power optimizers and rapid shutdown devices in China. Tiffany Douglass, director of global marketing for Tigo, said customers are responsible for the import duty, but the company is trying to address this issue.
“Tigo is continually investigating alternatives to minimize the tariff’s impacts by relocating manufacturing or other measures,” Douglass said.
Yaskawa Solectria’s manufacturing plant in Massachusetts. Yaskawa Solectria
All but one of SMA Solar’s U.S. inverters are manufactured in Germany, so the company is mostly clear of tariffs, according to a spokesperson. Its TS4-R optimizer device is the only one produced in China, but SMA has stocked up on pre-tariffed units to avoid the higher import prices.
Yaskawa Solectria Solar’s XGI and XTM inverters are made in Massachusetts and are free from tariffs, but its TL inverters are made in China. When the tariffs were first announced, Yaskawa Solectria worked with its vendors and suppliers to adjust its margins and absorb most of the tariff, said Samantha Olsen, marketing specialist for Yaskawa Solectria. The company has still had to raise its prices by 3.6%, but it has imported a large inventory of Chinese-manufactured TL inverters so the price doesn’t have to climb higher if the tariff jumps to 25%.
“We hope this inventory will last us quite a while so minimal impact will reach our customers,” Olsen said. “We are also actively looking into alternative locations to manufacture the TL series of inverters and move manufacturing out of China.”
Some companies that never called China home for manufacturing could see increased demand during this trade turmoil.
ABB manufactures its inverters in Italy and India and a spokesperson said it expects no impact on inverter business from the tariffs. Hanan Fishman, president of power optimizer company Alencon Systems, expressed similar thoughts.
“As an American manufacturer, it certainly gives us a cost advantage in the near term,” Fishman said. Alencon optimizers are made in Pennsylvania.
But Fishman also stresses that a trade war with China touches more than just Chinese inverter manufacturers.
“It is important to understand that we live a world with a global supply chain. So even though we build our products in the U.S., invariably there are some number of components in our products (typically small electronics made on our PCB) that are made in China,” Fishman said. He said Alencon will still indirectly be affected by the tariffs.
The Fronius manufacturing plant in Austria.Fronius
Fronius manufactures its inverters in Austria, so it’s also technically free from tariffs. Richard Baldinger, head of marketing and inside sales support for Fronius, said that if tariffs jump to 25%, he thinks there will be some significant shifts in the market.
“Even though the inverter is not the biggest cost factor in a PV system, a 25% increase cannot easily be absorbed in the overall project. This is where customers will start looking for alternatives, both for brands that do not manufacture in China and inverter technologies that provide more cost-effective solutions by its nature, such as string inverters,” Baldinger said.
But the company isn’t throwing a tariff party.
“However, we at Fronius, as a manufacturer in the solar industry, oppose tariffs due to its negative impact on the industry as a whole,” Baldinger said.
The industry is not waiting around to see what will happen after the 90-day negotiation period between President Trump and Chinese President Xi Jinping. It’s moving quickly to come up with solutions before higher tariffs are imposed.
Click here to view the results of Solar Power World’s inverter manufacturing survey.
Kelsey has spent almost seven years in the renewable energy space and is the current managing editor of Solar Power World.
We (Midnite Solar) manufacture and employ local people to make all of the products we can build here in the pacific northwest. Some parts are not available or would be insane to make domestically. We will continue to manufacture in the US and use as many local manufactured parts and processes as we can and stay fairly competitive. That’s the way we want to do it.
Having said that, most of our customers do not care where it comes from, whether India, China, US or anywhere else as long as it isn’t “junk” and is cheap. Price is the object for most consumers.
The US government has made it extremely difficult to be a manufacturer in the US with all the rules and regulations and now, tariffs. Like I said above, we do rely on several parts from overseas and China. There are 25% and 40% tariffs on those components that must come from China but a lot of the completed products actually built and shipped from China have NO tariffs ! For instance, charge controllers have not tariff from China…. only the duty charges of around 3.5%
How are we supposed to compete with that ?
i want to see made in America, in a balance ,… we see so many one trip containers in Texas. from China its insane.. I don’t agree with Trump on much but we do need more made in the USA for sure.
Bring all manufacturing back to the U.S. and I will gladly pay more if it ensures American jobs. Time to take care of our own.
Phil Cook and others – Maybe you would pay more but most will not, and a lot can’t. Competitiveness and thus market share was lost by the USA due to the inefficient, incompetent and/or corrupt management of commerce and the USA government! WAKEUP!
Are we all so selfish that we would enslave people to build our products just to save a few bucks? I would happily pay an additional 25% for all my products if it meant that my neighbor had a good paying job. And that price, including the extra 25%, would stay in the USA. Yes, in the beginning, it would be difficult as the manufacturing infrastructure is not in place at the moment, but over the course of a few years it would be. This is the reason the the Chinese now want to come to terms with the United State, because if they do not, we will find in short order that we don’t really need them like we currently think we do. For once, we have leadership that is willing to take the leap, make the sacrifices and build this country back up in the long game just as the Chinese have been doing for many years now. We as a country are so used to seeing what we can get TODAY and don’t stop to think about what that means for tomorrow.
OEM Ev Charging Pile Manufacturers Copyright © 2023 WTWH Media, LLC. All Rights Reserved. Site Map | Privacy Policy | RSS